Simple Measurements In Hydraulic Programs - Womack Machine Supply Firm

Strain Gauging Locations
All hydraulic fluid power techniques may at some time require troubleshooting, and an important first step in troubleshooting is to take stress measurements in varied components of the circuit. When constructing the system, just a little forethought in providing gauge factors will save a variety of time and trouble if troubleshooting ought to be required.

Fittings and flanges are required in practically each installation job as an intermediate joint between the pump, valve or actuator port to another component within the system. A easy cylinder circuit may require SAE Code 61 flanges on the pump to join its ports to the suction and pressure test point hoses. The strain hose may then terminate at the directional valve, the place it uses a JIC to NPT adapter to affix the hose to stated valve. Finally, NPT to JIC adapters at the work ports may feed hoses to a cylinder using SAE O-Ring boss ports fitted with 90° JIC to ORB adapters. Hydraulic fittings and flanges are simply unavoidable.

We're a stocking distributor of RYCO hose products from 1/4" 2 wire up to 2" six wire hose and fittings. This allows us to suit every hose earlier than it is installed on your tools for a neat and skilled trying end with a world quality product. Stocking 1000's of hydraulic seals in commonplace and metric allows us to reseal cylinders quickly and effectively, many the identical day, most inside 24 hrs. For those larger than common cylinders, our cylinder desk has over 30,000 ft-lbs of torque and capacity to clamp onto a 10" nut. We have now had clients combat larger piston nuts for days with a number of men working on it solely to bring it to us to break free in 15minutes.