Would That Not Be The Same With The LPG

The minimum gas supply pressure have to be 1" water column (0.036 psi or 249 pa or 2.5 Millibars ) above the manifold pressure printed on the equipment information plate
The utmost gas supply pressure should not exceed 14" water column (0.5 psi or 3487 pa or 34.9 Millibars)
The pure gas provide strain for this specific equipment, your appliance could also be completely different needs to be 7" water column (0.25 psi or 1744 pa or 17.4 Millibars)

Teflon (PTFE) - PTFE quick connect couplers are chemically resistant with a smooth, non-stick floor that facilitate steady flow charges and assist to remove media buildup. PTFE fittings have a low friction coefficient and good dielectric capability. PTFE hydraulic fittings are chemically inert and work nicely with chemicals, corrosive fluids, oils, drinking water, and compressed gases.

Use a round tap connector with a fast release outlet. Hoses then want a hose end connector fastened on the tip that may be push-match onto the connector on the tap fitting. Relying on the producer, there are several varieties of those faucet connectors. In the case of Hozelock fittings, there's a model for standard round and oval taps as much as 18 mm, one for mixer taps up to 24mm diameter, one for short spout sq./round mixer taps and the fourth sort for mixer taps with an external male thread (used for an aerator).

Verus Works manufactures hydraulic fittings per aerospace requirements revealed by SAE. Verus Works' most typical fitting is an aerospace normal boss port per AS5202 or MS33649. The corporate's AS4350 hex head plugs or AS5169 bleeder plugs mate with the AS5202 boss ports utilizing the AS930 straight thread port connection design.